How to Clean a Pocket Knife Blade in Super Easy DIY 3 Steps?

Using a dull knife is quite dangerous. If you are equipped with a pocket knife then you should know the dynamics and maintenance of the same. Though the internals of a pocket knife is not complicated, but getting an overview comes handy for you as well as longevity of the knife.

It is very necessary to know how To Clean A Pocket Knife Blade?

One of the prone zones for knife dirt is the pivot point. If your knife is a pivot then the dirt may lower or more difficult the opening procedure. It can also buildup dirt in the area of the lock that can prevent the knife from locking open or closed.

How To Clean A Pocket Knife Blade

This could lead to serious injury while opening or closing. If you are more of a traveler who uses the pocket knife regularly then the susceptible to get gritty dirt’s is maximum.

For the above reason, it is mandatory to keep a tab of regular maintenance on your pocket knives. Keeping your knife clean and lubricated is essential. One should regularly inspect their knife for potential problems like corrosion or rust. The internal components of a knife are very prone to corrosion and rust if not given proper care.

Initial Steps for Knife Care

There are three easy steps in keeping your knife efficiency intact. We are providing an elaborative approach to those three steps.

1. Cleaning

  • If the knife blade got sand and grit then one should use warm, soapy water and wash the knife with a bristle brush. Just brush done the whole area of your pocket knife including the blade and the handle scales.This cleaning process is preferable for minor dirt. It provides a lustrous look to the grip. You don’t have to worry about the wet or soapiness in the internals of your knives. Just follow the method and clean the outer surface of your knife. Give proper attention to rinsing it well.
  • In case your knife has an excessive dirt buildup that is unable to be removed by the above process, then there are different methods. Apart from the dirt if your knife has been corroded or been rusty the use the mixture of baking soda and water to clean it up. One of the other processes involves vinegar. You just have to keep your knife into vinegar overnight. Clean it afterward with steel wool or emery paper. It will provide efficient cleanliness to your dirty knife.
  • If still, your knife is dirty, then you have to disassemble the knife for the more elaborative cleaning procedure. This will need some of the specific tools that can help you to tighten and loose the small screws. Just keep in mind some of the knife manufacturers voids the warranty claim upon disassembling.

2. Choosing and Applying an Effective Lubricant

how to clean and lubricate a folding knife

Pocket knives need to be lubricated due to the different complicated parts it consists of. The whole system of the knife is made up of pivot, locking surfaces, or slides. These parts need to be lubricated at regular intervals. There are different types of lubricants available that provide effective movement to the pocket knife.

  • One of the popular lubricants is petroleum-based wet lubricants. These lubricants have some of the core attributes that make them superior among their peers.
  • The other type of lubricant is dry lubricants that tend to attract less packet lint. These lubricants wither come as an aerosol can or in a graze tube. These effectively dries on the surface leaving a protective film which in turn provides fluent movement of the parts.

With the help of these lubricants, one can take the utmost care of their knives.

DIY How to Clean Pocket Knife Blade?

If you are an artist who needs a pocket knife for performing some of the effective functions then taking care of them is the foremost. Just keeping the pocket knife will not provide productive work.

Cleaning and keeping the pocket knife handy for usage is an easy task. There are some of the DIY processes which enable you to perform this cleaning task easily. If you don’t want to buy any other materials then just giving some of the household’s items a try can be efficient.

One can easily use some of the household’s materials for the cleaning process of their knife. Some of them are analyzed below in detail:

how to clean the inside of a pocket knife
  1. The delicate and complicated parts can be cleaned with the help of toothpicks. Some of the knives are equipped with different parts which are quite complicated. The narrow passages can only be cleansed with the help of sharp materials. Often people use a needle, but if you are unable to find one then toothpick can help you for the same.
  2. You can also use the abundantly found vinegar. Vinegar is one of the cooking ingredients which can be easily found in any household. This helps to clean the heavily corroded knives in just a day or two.
  3. The availability of baking soda in any household is evident. This can help you to cleanse the lightly corroded knives without any type of hassles.

Apart from these DIY techniques, proper care of any accessory is mandatory. If you are just keeping any of the accessories for the sake of keeping then it may decrease the longevity. If proper care can be taken then the accessory such as a pocket knife can attain a long lifetime.

1. Cleaning a Rusty Knife Blade

If your knife has been corroded or got rusty then you can clean it with some of the essential stuff that helps to remove the rust once and for all.

Cleaning A Rusty Knife Blade

i. Lightly rusted blade

If you got a lightly rusted blade then the use of baking soda can provide you desired results. You just have to prepare a thick paste of baking soda with water and spread it over the corrosive part. After some time rub it with steel wool. You will get a shiny surface of your blade.

ii. Heavily Rusted Blade

For heavily rusted knife the use of vinegar is quite preferable. One just needs to soak the blade overnight and clean it in the morning.

2. Polishing a Knife Blade

Polishing a knife blade can be cumbersome for those who are unaware of some of the effective ways. Keeping your pocket knife in sharpen and polished state can be done with some of the simple techniques. Here we are providing effective techniques to attain an optimal polished surface of your knife blade.

Steps for Polishing the Knife Blade:

  • If your knife has been corroded or rusted then the prior step for polishing needs the proper cleaning of the blade.
  • The cleaning process can be done with some of the effective materials such as baking soda or vinegar. It is dependent upon the magnitude of rust. If our knife is heavily corroded then it is better to use vinegar. In case the rust is lightly spreader, then use baking soda.
  • The polishing of the knife blade can be done with different materials. There are a wide variety of materials that provide effective polishing of the knife blade.

Below are some of the best products that help in polishing off your knife blade:

  • There is some PVC buffing material that provides a shiny touch to the knife blade. It can be done with the use of rotary motion by attaching the PVC. The rotary motion of the plastic-clad solid exerts the upper surface of the knife thus making it quite shiny.
  • With the use of sandpaper, one can easily polish the knife blade. The sandpaper or emery works on the principle of friction. If you want to polish the knife blade on your own then this is the perfect method.
  • The use of rouge is the most common process which helps to polish your knife blade. There are different kinds of rouge available for the polishing of a knife blade. You just have to maintain the desired motion while polishing.

Maintaining the longevity of pocket knife is one of the essential aspects of keeping the knife. There are different types of oil available in the market that provides maximum life to your pocket knife.

This is how to clean a pocket knife blade perfectly in simplest ways.

You can use these oils to safeguard your knife.With just a couple of drops, one can prevent corrosion, discoloration, and the rust of your pocket knife. After the use of these oils, one can get away a shinier and faster working pocket knife. These are the best accessories for a pocket knife. Every knife lover who wants to provide longevity to their knife blade should use this.

Reply